Rane ME 60 Dual Channel 30-Band EQ in Middletown, New York

Rane ME 60, Dual Channel 30-Band Micro-Graphic Equalizer
INPUTS
All three Inputs are wired in parallel and are actively balanced, except the unbalanced RCA phono. Each works equally well. Choose strictly from a required hardware point- of-view, there will be no performance trade-offs. The wiring convention adheres to American, British and International standards of pin 2 or tip being hot, pin 3 or ring being return, and pin 1 or sleeve being shield. It is not necessary to short any inputs to ground--it doesn't hurt, it's just not necessary. Use pin 1, or the shell, for shield ground. Unbalanced operation involves using only pin 2 or tip as signal, and pin 1 or sleeve as shield and ground.
OUTPUTS
The Outputs mimic the Inputs. Balanced output requires using pin 2 or tip, and pin 3 or ring for the signal. It does not require pin 1 or shield. The signal exists differentially between the two balanced leads; ground is not involved. For hum-free systems ground is used only for shielding.
EXPANDING
Expanding and/or daisychaining the Inputs and Outputs normally uses the 1?4" jacks. Three parallel Input connectors allows driving a second signal processor or amplifier without special cabling.
SIGNAL LEVELS
Signal levels from -10 dBV to +4 dBu are considered normal and within range (at least 20 dB of headroom exists above these levels). Do not directly connect microphones into the ME 60. These require a mic preamp.
$300.00
Call 845-344-3632
Mixer Mixing Microphones sound
fender audio guitar bass microphones sound equipment Gibson music speaker